Unscrew the nut
holding the winder (you may need a bigger screwdriver than the one
shown). 
Remove the holder
and the washer as one piece.
Remove the spacer,
noting its position.PENTACON six TL disassembly - Part 2
Please Note: The PENTACON six TL can be a rather delicate piece of precision mechanics. If you are not comfortable with attempting to take one apart for repair/maintenance please take it to a repair centre. These pages are to be used as a guide only. I will not be responsible for any damage caused to cameras due poor workmanship.
Unscrew the nut
holding the winder (you may need a bigger screwdriver than the one
shown).
Remove the holder
and the washer as one piece.
Remove the spacer,
noting its position.
Then remove the
winder.
Now unscrew the nut
holding the speed selector dial.
Remove it and
the washer.
Remove the holder and the washer as one piece.
Next remove the speed selector dial and washer.
Locate the screw on the left side of the top plate and remove it.
Next remove the four screw that hold the Waist Level Finder.
This page was created on Tuesday 13th January 2004